Kodak 1500 Setting up the Camera Holder

18 Chapter 3 Getting Started

Inserting the Cable into a Wired Camera

To insert the cable into a wired camera, hold the camera in one

hand and insert the cable end into the bottom of the camera.

Make sure the cable is locked into place.

Figure 9 Inserting the Cable

To release the cable, press the Cable Release button and gently

pull the cable out.

Setting up the Camera Holder

To set up the camera holder, follow these steps:

1Select a smooth, flat, accessible area.

2Clean the surface.

3Remove the double-sided tape protection from the support

(2).

4Place the taped side of the camera holder on the cleaned

surface and press firmly several times. Leave for two hours.

Cable Release

button

Contents

Main Notice Contents Page About This Guide Note to the User Warning and Safety Instructions CAUTIONS: Marking and Labeling Symbols Page 1 Camera Overview Camera Components Wireless Camera Figure 1 Camera ComponentsWireless Wired Camera Figure 2 Camera ComponentsWired Camera Holder Components Docking Station Components Figure 4 Docking Station Components Page Charge Station Components System Components Page Table 1 System Components (Continued) Item Description 2 Overview Computer System Requirements General Software Overview KODAK Dental Imaging Software KODAK Acquisition Module Settings 1 2 3 4 5 Review Window Figure 7 Review Window Image Processing Toolbar Page 3 Setting Up the KODAK 1500 Intraoral Camera Inserting the Battery into a Wireless Camera Inserting the Cable into a Wired Camera Setting up the Camera Holder . Setting up the Docking Station Connecting the Docking Station to a Computer Connecting the Docking Station to a Video Monitor Page Status Icons Page Page Setting up the Charge Station for a Wireless Cam era Page Page Pairing the Wireless Camera to the Docking Station Using the Camera with a Protective Sheath 4 and Storing Images Acquiring Images Using a Video Monitor Acquiring Images Using a Computer Page Page 5 Hygiene and Disinfection 36 Chapter 5 Maintenance manufacturers instructions for the appropriate contact time. Maintenance Wipe the outer covers of the units with a soft, dry cloth. Perform the following maintenance activities. Daily Perform these activities daily on the camera and docking station. Disposing of the Battery Page 6 To troubleshoot a wireless camera, see Table 4 on page 41. 40 Chapter 6 Troubleshooting Table 3 Troubleshooting a Wired Camera (Continued) Camera with Wired Configuration (Continued) Table 4 Troubleshooting a Wireless Camera Camera with Wireless Configuration 42 Chapter 6 Troubleshooting Table 5 Troubleshooting System Setup Problem/Solution Page 7 and Specifications