Kodak 1500 Marking and Labeling Symbols

KODAK 1500 Intraoral Camera User’s Guide (8G7939) vii

•DO NOT place objects within the field of operation of

the equipment.

•Disinfect any parts of the camera that come into

contact with the patient and the operator after each

patient has been exposed to the camera.

•Always use a new protective sheath for each patient.

•Turn off the camera before charging. Failure to do so

will shorten the life of the battery.

•The surface temperature of the LED window can rise up

to 39°C. Do not allow the window to come in contact

with the patient’s mouth for more than 10 minutes.

•When the camera is not in use, ensure that the ON/OFF

button is set to OFF.

•Ask the patient to refrain from moving during the entire

period of exposure.

•The power adapter is certified by IEC 60601-1. You

MUST use the provided AC Mains adapter only.

Marking and Labeling Symbols

Type BF device symbol complying

with the IEC 60601-1 standard

Contents

Main Notice Contents Page About This Guide Note to the User Warning and Safety Instructions CAUTIONS: Marking and Labeling Symbols Page 1 Camera Overview Camera Components Wireless Camera Figure 1 Camera ComponentsWireless Wired Camera Figure 2 Camera ComponentsWired Camera Holder Components Docking Station Components Figure 4 Docking Station Components Page Charge Station Components System Components Page Table 1 System Components (Continued) Item Description 2 Overview Computer System Requirements General Software Overview KODAK Dental Imaging Software KODAK Acquisition Module Settings 1 2 3 4 5 Review Window Figure 7 Review Window Image Processing Toolbar Page 3 Setting Up the KODAK 1500 Intraoral Camera Inserting the Battery into a Wireless Camera Inserting the Cable into a Wired Camera Setting up the Camera Holder . Setting up the Docking Station Connecting the Docking Station to a Computer Connecting the Docking Station to a Video Monitor Page Status Icons Page Page Setting up the Charge Station for a Wireless Cam era Page Page Pairing the Wireless Camera to the Docking Station Using the Camera with a Protective Sheath 4 and Storing Images Acquiring Images Using a Video Monitor Acquiring Images Using a Computer Page Page 5 Hygiene and Disinfection 36 Chapter 5 Maintenance manufacturers instructions for the appropriate contact time. Maintenance Wipe the outer covers of the units with a soft, dry cloth. Perform the following maintenance activities. Daily Perform these activities daily on the camera and docking station. Disposing of the Battery Page 6 To troubleshoot a wireless camera, see Table 4 on page 41. 40 Chapter 6 Troubleshooting Table 3 Troubleshooting a Wired Camera (Continued) Camera with Wired Configuration (Continued) Table 4 Troubleshooting a Wireless Camera Camera with Wireless Configuration 42 Chapter 6 Troubleshooting Table 5 Troubleshooting System Setup Problem/Solution Page 7 and Specifications