38 www.kodak.com/go/support
Troubleshooting
Picture quality problemsStatus Solution
Picture is not clear ■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■Clean the lens (see page45).
■Make sure the camera is not in Macro mode if you are more than
27.6 in. (70 cm) from your subject.
■Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
Picture is too dark ■Reposition the camera for more available light.
■Use Fill flash (see page6) or change your position so light is not
behind the subject.
■Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page43.)
■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
Picture is too light ■Reposition the camera to reduce the amount of available light.
■Turn the flash off (see page6).
■Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page43.)
■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■In Auto mode, adjust the Exposure Compensation (see page22).