Troubleshooting
www.kodak.com/go/support 42
Direct printing (PICTBRIDGE enabled printer) problemsPicture quality problemsStatus Solution
Cannot print to a
PICTBRIDGE Printer
■In the Setup menu, change the Computer Connection setting to
Other Application (see page34).
Status Solution
Picture is not clear ■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■Clean the lens (see page46).
■Make sure the camera is not in Macro mode if you are more than
27.6 in. (70 cm) from your subject (see page32).
■Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■Use a larger picture size (see page30).
■If you’re manually adjusting the ISO speed, realize that high ISO
setting may cause grainy pictures (see page31).
Picture is too dark ■Reposition the camera for more available light.
■Use Fill flash (see page8) in Program mode, Backlight in SCN mode,
or change your position so light is not behind the subject.
■Move so that the distance between you and the subject is within the
effective flash range. (See Specifications, page44.)
■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■In Program mode, increase the Exposure Compensation (see
page31).