12 A-61195 July 2003
System Requirements and Software Installation
Following is the minimum system configuration to run the i80 Scanner.
NOTE: The actual performance of the system depends on the scanning
application, choice of scanning parameters, and the host com puter
configuration. If the scanner is not performing at the optima l speed,
using a faster PC and/or more RAM may be necessary to obtain the
rated throughput.
IBM PC (or compatible) with a Pentium III 1.0 GHz processor
Microsoft Windows 98, Windows NT 4.0, Windows 2000,
Windows Millennium Edition (Me), or Windows XP
100 MB of available hard disk space (200 MB is recommended)
128 MB of RAM
Monitor (VGA)
•Mouse
CD-ROM drive

Installing the

scanner drivers 1. Start your PC and Windows application.
2. Insert the i80 Scanner Installation CD t hat contains the device drivers in
your CD-ROM drive.
NOTE: If the CD does not start automati cally, click on the Start button and
choose Run, then type d:\driver\setup.exe (where “d” is the letter of
your CD-ROM drive). Click on the OK button.
3. Follow the instructions on the screen to complete the driver installation.