Kodak AS-2569 manual Processing Sequence-3.5 fpm, Replenishment and Wash Rates-3.5 fpm, 70 mm 2-in

Processing Sequence—3.5 fpm

KODAK Aerial Color Processor, Model 1611

Solution/	Tank	Time	Solution Temperature
Step	No.	(Seconds)
SKIP	1, 2, 3	21.3	—
TANKS
First	4, 5	141.6	(49.4 ± 0.3°C) 121 ± 0.5°F
Developer
First Stop	6	70.5	(46 ± 3°C) 115 ± 5°F
Wash	7	71.3	(49 ± 3°C) 120 ± 5°F
Color	8, 9	140.7	(49 ± 0.6°C) 120 ± 1°F
Developer
Second	10	71.1	(49 ± 3°C) 120 ± 5°F
Stop
Wash	11	70.5	(49 ± 3°C) 120 ± 5°F
Bleach	12	70.3	(49 ± 3°C) 120 ± 5°F
Fixer	13	71.3	(49 ± 3°C) 120 ± 5°F
Final Wash*	14, 15,	211.3	(49 ± 3°C) 120 ± 5°F
	16
Dryer	—	106.5	(63 ± 3°C) 145 ± 5°

*Inject EA-5 Stabilizer and Replenisher into tank 16 of the final wash at a rate of 50 mL/min for all film widths.

KODAK EKTACHROME RT Processor, Model 1811,

Quick-Change

Solution/	Tank	Time	Solution Temperature
Step	No.	(Seconds)
SKIP	1 - 6	39.3	—
TANKS
First	7, 8	141.3	(49.4 ± 0.3°C) 121 ± 0.5°F
Developer
First Stop	9	70.3	(46 ± 3°C) 115 ± 5°F
Wash	10	71.3	(49 ± 3°C 120 ± 5°F)
Color	11, 12	140.7	(49 ± 0.6°C) 120 ± 1°F
Developer
Second	13	70.3	(49 ± 3°C) 120 ± 5°F
Stop
Wash	14	71.3	(49 ± 3°C) 120 ± 5°F
Bleach	15	70.5	(49 ± 3°C) 120 ± 5°F
Fixer	16	71.1	(49 ± 3°C) 120 ± 5°F
Final Wash*	17, 18	140.7	(49 ± 3°C) 120 ± 5°F
Dryer†	—	147.3	(60 ± 3°C) 140 ± 5°F

*Inject EA-5 Stabilizer and Replenisher into tank 18 of the final wash at a rate of 50 mL/min for all film widths.

†Set air damper control knobs at 8. The temperature of the dryer may require adjustment depending on the ambient temperature and humidity conditions in the processing area.

Replenishment and Wash Rates—3.5 fpm

Models 1611 and 1811 with Quick-Change*

Solution/	Basic			Film Width
	Rate
Step	(mL/sq ft)		70 mm	5-in	9 1/2-in
			(mL/min)	(mL/min)	(mL/min)
First	150		120	220	415
Developer
First Stop	200		160	290	555
Wash			—2 gal/min—
Color	250		200	365	695
Developer
Second	200		160	290	555
Stop
Wash		—2 gal/min (Model 1611 only)—
Bleach	90		75	130	250
Fixer	100		80	145	275
Final			—2 gal/min—
Wash†

*These rates have been rounded to the nearest usable increment.

†Inject EA-5 Stabilizer and Replenisher into tank 16 (Model 1611) or tank

18(Model 1811) of the final wash at a rate of 50 mL/min for all film widths. In the Model 1611, this was flows countercurrent to tanks 15 and

14.In the Model 1811, this wash overflows from tank 17 into tank 14.

Processing Sequence—5.3 fpm

KODAK EKTACHROME RT Processor, Model 1811

Solution/	Tank	Time	Solution Temperature
Step	No.	(Seconds)
SKIP	1, 2, 3	14.6	—
TANKS
First	4, 5, 6	140.3	(49.4 ± 0.3°C) 121 ± 0.5°F
Developer
First Stop	7	46.9	(46 ± 3°C) 115 ± 5°F
Wash	8	46.9	(49 ± 3°C) 120 ± 5°F
Color	9, 10,	187.5	(49 ± 0.6°C) 120 ± 1°F
Developer	11, 12
Second	13	46.9	(49 ± 3°C) 120 ± 5°F
Stop
Wash	14	46.9	(49 ± 3°C) 120 ± 5°F
Bleach	15	46.9	(49 ± 3°C) 120 ± 5°F
Fixer	16	46.9	(49 ± 3°C) 120 ± 5°F
Wash	17	46.9	(49 ± 3°C) 120 ± 5°F
Stabilizer	18	46.9	—Equilibrium— *
Dryer	—	97.8	(60 ± 3°C) 140 ± 5°F
(Vents set
at 8)†

*No temperature controlling device is provided; solution temperature attains “equilibrium” depending on temperature of replenisher and surrounding conditions.

†Set air damper control knob at 8. The dryer temperature may require adjustment depending on the ambient temperature and humidity conditions in the processing area.

KODAK AEROCHROME III MS Film 2427 • AS-2569 3