Troubleshooting

If...

Try one or more the following

In Review mode, a

Transfer the picture to the computer (page 15).

blue or black

 

screen is displayed

 

instead of a

 

picture.

 

 

 

Shutter button

Turn on the camera (page 2).

does not work.

Wait until the ready light stops blinking red before attempting to take

 

 

another picture.

 

Transfer pictures to the computer (page 15), delete pictures from the

 

camera (page 13), switch image storage locations (page 26), or

 

insert a card with available memory (page 4).

 

For best pictures, see page 5.

 

 

Slide show does

Adjust the camera Video Out setting (NTSC or PAL, page 28).

not run on external

See the external device’s user’s guide.

video device.

 

 

 

Picture is too light.

Move so there is at least 3.3 ft (1.0 m) between camera and subject.

 

Decrease Exposure Compensation (page 25).

 

 

Picture is not clear.

Clean the lens (page 55).

 

Move so there is at least 3.3 ft (1.0 m) between the camera and the

 

subject.

 

Place the camera on a flat, steady surface or use a tripod.

 

 

Picture is too dark.

Turn on the flash (page 8).

 

Move so there is no more than 7.9 ft (2.4 m) between the camera and

 

the subject.

 

Use Fill flash (page 24) or change your position so light is not behind

 

the subject.

 

Increase Exposure Compensation (page 25).

 

 

www.kodak.com/go/support

39

Page 45
Image 45
Kodak C530, C315, CD50, C315, C315, CD50 manual For best pictures, see, Troubleshooting