Troubleshooting

If...

Try one or more the following

In Review mode, a

Transfer the picture to the computer (page 12), then format the card in

blue or black

the camera (page 25).

screen is displayed

Caution: Formatting a card deletes all pictures and videos,

instead of a

including protected files.

picture.

 

 

 

Shutter button

Turn on the camera (page 2).

does not work.

Wait until the ready light stops blinking red before attempting to take

 

another picture.

 

Transfer pictures to the computer (page 12), delete pictures from the

 

camera (page 10), switch image storage locations (page 23), or insert

 

a card with available memory (page 3).

 

For best pictures, see page 4.

 

 

Slide show does

Adjust the camera Video Out setting (NTSC or PAL, page 25).

not run on external

See the external device’s user’s guide.

video device.

 

 

 

Picture is too light.

Move so there is at least 24 in. (61 cm) between camera and subject.

 

Decrease Exposure Compensation (page 21).

 

 

Picture is not clear.

Clean the lens (page 51).

 

Move so there is at least 24 in. (61 cm) between the camera and the

 

subject.

 

Place the camera on a flat, steady surface or use a tripod.

 

 

Picture is too dark.

Turn on the flash (page 7).

 

Move so there is no more than 7.9 ft (2.4 m) between the camera and

 

the subject.

 

Use Fill flash (page 7) or change your position so light is not behind

 

the subject.

 

Increase Exposure Compensation (page 21).

 

 

36

www.kodak.com/go/support

Page 42
Image 42
Kodak C533, C503 manual Including protected files