Kodak C533, C503 manual Camera/computer communications

Troubleshooting

If...	Try one or more of the following
Ready light glows	■ Transfer pictures to the computer (page 12), delete pictures from the
steady red.	camera (page 10), switch image storage locations (page 23), or insert
	a card with available memory (page 3).
	■ Wait. Resume picture taking when the light turns green.
	■ Change the image storage location to internal memory (page 23), or
	use a different card.
Ready light glows	■ Camera is operating normally.
steady green.
Camera/computer communications

If...	Try one or more of the following
The computer does	■ Visit www.kodak.com/go/c533support or
not communicate	www.kodak.com/go/c503support.
with the camera.	■ Turn on the camera (page 2).
	■ Install new batteries (page 1) or charge rechargeable batteries.
	■ See the Power Management section of the laptop user’s guide to
	disable this feature.
	■ Connect cable to camera and computer port (page 12).
	■ Install the software (page 11).
	■ Disconnect the USB cable. Close all open applications. Re-install the
	software (page 11).
	■ Disconnect camera from the computer. Close all software applications,
	reconnect camera.
Cannot transfer	■ Disconnect USB cable. (If using camera dock or printer dock,
pictures.	disconnect cable and remove camera from dock). Close all open
(The Add New	applications. Re-install the software (page 11).
	■ Disconnect the USB cable. Close all open applications. Re-install the
Hardware Wizard
cannot locate	software (page 11).
drivers.)

38 www.kodak.com/go/support