Kodak DP1100, DP900 manual Connecting to a Video Player, Connecting with an AV Cable, English

Connecting the Projector

Connecting to a Video Player

If your video player uses a round, one-prong composite video connector, you need only the A/V cable that was shipped with the projector. If your video player uses a round, four-prong S-video connector, you need an S-video cable in addition to the

A/V cable.

Note: The S-video cable is sold separately. To order the cable, refer to the Reference Manual.

Connecting with an AV Cable

audio/video cable

1.Plug the A/V cable’s yellow connector into the “video-out” port on your video player. This port may be labeled “To Monitor.”

2.Plug the other yellow connector into the composite connector on the back of the projector.

3.Plug the A/V cable’s white connector into the left “audio out” port on your video player. Plug the cable’s red connector into the right “audio out” port on the video player.

4.Plug the A/V cable’s other white and red connectors to the left and right “audio in” ports on the projector.

To start using your projector, go to “Starting the Projector” on page 11.

ENGLISH

3/99 9