Kodak E-24 manual Retouching, More Information, KODAK VERICOLOR Slide Film, Processing, CAT 000

KODAK VERICOLOR Slide Film

PROCESSING

Process KODAK VERICOLOR Print Film in KODAK FLEXICOLOR Chemicals for Process C-41. Do not process this film in washless minilab process cycles, i.e., Process C-41B and C-41RA. This film is of an older design that requires a stabilizing agent for image stability. Process this film only in a processor that uses KODAK FLEXICOLOR Stabilizer III and Replenisher.

For information on processing, see KODAK Publication No. Z-131, Using KODAK FLEXICOLOR Chemicals at www.kodak.com/go/photochemicals.

RETOUCHING

Use KODAK E-6 Transparency Retouching Dyes or KODAK Liquid Retouching Colors to retouch transparencies made on KODAK VERICOLOR Print Film.

Note: Although both types of dyes will produce a good visual match, neither will perfectly match the image dyes of KODAK VERICOLOR Print Film; therefore, you may notice a slight mismatch in photomechanical reproductions of the transparencies. Also, when retouched transparencies are used in displays for an extended period of time, the retouching dyes and image dyes may not change a the same rate.

MORE INFORMATION

Kodak has many publications to assist you with information on Kodak products, equipment, and materials.

The following publications are available from Kodak customer service, or from dealers who sell Kodak products, or you can contact Kodak in your country for more information.

E-30Storage and Handling of KODAK Films and Papers— Before and After Processing

Z-131Using KODAK FLEXICOLOR Chemicals

Note: The Kodak materials described in this publication for use with KODAK VERICOLOR Films are available from dealers who supply KODAK PROFESSIONAL Products. You can use other materials, but you may not obtain similar results.

KODAK VERICOLOR Slide Film	Kodak, Estar, Flexicolor, Vericolor, and Wratten are trademarks.	Minor Revision 12-02
KODAK Publication No. E-24		Printed in U.S.A.

CAT 000 0000