25
Chapter 4
Connecting to a Computer
A USB cable is required to connect to a computer. Use the USB cable that came
with your Kodak EasyShare camera. To purchase one separately, see a retail
dealer of Kodak products or visit www.kodak.com/go/printerdock.
CAUTION:
Make sure your camera is NOT in the printer dock when
you are connecting to the computer.
1Make sure the power is connected to the printer dock (see Connecting the
Power, page5), and the Kodak EasyShare printer dock software is installed
on the computer (see Installing the Software, page21).
2Plug the labeled end of a USB cable into
the labeled USB port on your computer. See
your computer documentation for details.
3Plug the other end of the USB cable into the
square USB connector on the back of the
printer dock.
urg_00170.book Page 25 Thursday, August 14, 2003 7:20 AM