Configuring Your Printer
11 www.kodak.com/go/aiosupport
Adding a network connection to a USB-connected computer
You can change the way you connect to your printer at any time.

For WINDOWS

OS-based

computers

To change the printer connection type from USB to a wireless (Wi-Fi) network:
1. On the printer control panel, press Home.
2. Press to select Network Settings, then press OK.
3. Press to select View Network Configuration, press OK, then confirm you
have an IP address.
4. If you have not already done so, connect to your wireless network. See
Configuring a wireless network connection, page5.
5. On your computer, disable any firewall you have installed until you have
successfully completed the installation For more information on firewalls, go to
www.kodak.com/go/inkjetnetworking.
6. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility.
7. If your wireless all-in-one printer (example: KodakESP5200+1133) is not listed:
a. Select No, my printer is not listed, then click Next.
b. From the drop-down list, select your printer (ESP5200 Series (5250/5260).
c. Select Network - Wireless/WiFi, then click Next.
When your printer is detected, driver installation begins.
8. If your wireless all-in-one printer (example: KodakESP5200+1133) is listed:
a. Highlight the all-in-one printer that is connected to your network.
b. Select Yes, my printer is listed, then click Next.
When your printer is detected, driver installation begins.
9. When driver installation is complete, click Done.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakESP5200+1133).

For MACINTOSH

Computers

To change the printer connection type from USB to a wireless (Wi-Fi) network:
1. Disconnect the printer from the computer.
2. On the printer control panel, press Home.
3. Press to select Network Settings, then press OK.
4. Press to select View Network Configuration, press OK, then confirm you
have an IP address. If you do not have an IP address, see Configuring a wireless
network connection, page5.
5. From the dock, open System Preferences.
6. Click Print & Fax.
7. C lic k t he + sign to add the printer.
8. Select the printer from the list of available printers, then click Add.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakESP5200+1133).