Kodak LS443 manual Setting Video Out, Turning Off the Low Light Auto Focus LED

Chapter 6

Turning Off the Low Light Auto Focus LED

You can prevent the Low Light Auto Focus LED (page 14) from firing.

NOTE: When the Low Light Auto Focus LED is off, the camera may not perform as well in low light.

1Press the Menu button.

2Move the joystick to highlight Setup , then press the OK button.

3Move the joystick to highlight Low Light

Auto Focus LED , then press the OK button.

4Move the joystick to highlight Off, then press the OK button.

5Press the Menu button to exit the menu. This setting remains until you change it.

Setting Video Out

Video Out must be set correctly to run a slide show on a television or other external device (see page 47).

1Press the Menu button.

2Move the joystick to highlight Setup , then press the OK button.

3Move the joystick to highlight Video Out , then press the OK button.

4Move the joystick to highlight an option:

NTSC—used in most countries except those in Europe and China. The United States and Japan use NTSC.

PAL—used in Europe and China.

5Press the OK button to accept the change.

6Press the Menu button to exit the menu. This setting remains until you change it.

58