46 www.kodak.com/go/support
Troubleshooting
Picture quality problems
Computer does not
communicate with
the camera
■Make sure the battery is charged and installed correctly (see
page 1).
■Turn on the camera.
■Make sure the USB cable model U-8 is connected to the camera
and the computer (see page 37). (If using an EasyShare dock,
check all cable connections. Make sure the camera is seated on
the dock.)
■Make sure EasyShare software is installed (see page 36).
Status Solution
Picture is not clear ■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■Clean the lens (see page 52).
■Make sure the camera is not in Macro mode if you are more than
27.6 in. (70 cm) from your subject.
■Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
Picture is too dark ■Reposition the camera for more available light.
■Use Fill flash (see page 7) or change your position so light is not
behind the subject.
■Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 50.)
■To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
Status Solution