Kodak M893 IS manual Using the capture plus tab, White Balance, Exposure Metering

Doing more with your camera

Using the capture plus tab

Press Menu,	,	,		Options
and OK to access settings
White Balance			Auto—automatically corrects white balance. Ideal for general
Choose your lighting			picture taking.
condition.			Daylight—for pictures in natural lighting.
			Tungsten—corrects the orange cast of household light bulbs.
			Ideal for indoor pictures under tungsten or halogen lighting
			without flash.
			Fluorescent—corrects the green cast of fluorescent lighting.
			Ideal for indoor pictures under fluorescent lighting without
			flash.
			Open Shade—for pictures in shade in natural lighting.
Face Detection Capture			On—In Auto mode (and in SCN modes designed for pictures
Choose if faces get focus			of people), the camera attempts to focus on faces.
priority.			Off
Exposure Metering			Multi-Pattern—evaluates lighting conditions throughout
Evaluate light levels at specific			the image to give an optimum picture exposure. Ideal for
areas of a scene.			general picture taking.
			Center-Weight—evaluates the lighting conditions of the
			subject centered in the lens. Ideal for backlit subjects.
			Spot—similar to Center-weighted, except the metering is
			concentrated on a smaller area of the subject centered on the
			LCD. If used with Selectable AF zones, the exposure spot
			follows the focus zone. Ideal when you need an exact exposure
			of a specific area in the picture.

30 www.kodak.com/go/support