Kodak V1233 manual Computer/connectivity problems

		Troubleshooting
	Status	Solution
	Battery life is short	■ Make sure the correct battery type is installed (see page 60).
		■ Wipe the contacts with a clean, dry cloth before inserting a
		battery in the camera.
		■ Insert a new or charged battery (see page 1).
	You cannot take a	■ Turn the camera off, then on again.
	picture	■ Depress the Shutter button all the way (see page 5).
		■ Insert a new or charged battery (see page 1).
		■ Memory is full. Transfer pictures to the computer (see page 45),
		delete pictures (see page 15), or insert another card.
	Error message appears	■ Turn the camera off, then on again.
	on LCD	■ Remove the memory card.
		■ Turn off the camera. Remove the battery. Wipe the contacts with
		a clean, dry cloth.
		■ Insert a new or charged battery.
		■ If the problem still exists, get help (see page 54).
	Memory card not	■ Card may be corrupted. Format the card in the camera (see
	recognized or camera	page 36).
	freezes with card	■ Use another memory card.
	Cannot find the	■ To view pictures on a card or in internal memory, see page 14.
	desired picture/video
Computer/connectivity problems
	Status	Solution
	Pictures do not	■ See Help in EasyShare software.
	transfer to computer
	Slide Show does not	■ Adjust the camera Video Out setting to NTSC or PAL (see
	run on an external	page 36).
	video device	■ Make sure the external device settings are correct. (See the
		device’s user’s guide).
www.kodak.com/go/support			51