Kodak Z1285, Z1275 manual Camera ready light status, Turn on the flash see

Troubleshooting

If	Try one or more of the following
Picture is too dark.	■ Turn on the flash (see page 9).
	■ Move so there is no more than 11.8 ft (3.6 m) in wide angle and
	6.9 ft (2.1 m) in telephoto between the camera and the subject.
	■ Use Fill flash (see page 9) or change your position so light is not
	behind the subject.
	■ Increase Exposure Compensation (see page 37).
Camera does not	■ Purchase a certified SD/SDHC or MMC card.
recognize	■ Reformat the card (see page 32).
SD/SDHC or MMC
	Caution: Formatting a card deletes all pictures and videos,
card.	including protected files.
	■ Insert a card into the slot, then push to seat (see page 3).
Camera freezes up	■ Turn the camera off, then back on. Make sure the camera is turned off
when a card is	before inserting or removing a card.
inserted or
removed.
Memory card full.	■ Insert a new card (see page 3), transfer pictures to the computer (see
	page 45), or delete pictures (see page 15).
Memory card and	■ Transfer pictures to the computer (see page 45), then format the card
internal memory	or internal memory (see page 32).
full.	Caution: Formatting a card deletes all pictures and videos,
	including protected files.
Camera ready light status

If	Try one or more of the following
Ready light does	■ Turn on the camera (see page 2).
not turn on and the	■ Install new batteries (see page 1) or charge rechargeable batteries.
camera does not	■ Turn camera off, then back on.
work.
Ready light blinks	■ Camera is operating normally.
green.
www.kodak.com/go/support		51