![](/images/backgrounds/202318/bg35.png)
Troubleshooting
www.kodak.com/go/support 47In Review mode, a
blue or black
screen is displayed
instead of a
picture.
■Transfer the picture to the computer (page39), then format the card or
internal memory (see page37).
CAUTION: Formatting a card deletes all pictures and videos,
including protected files.
Shutter button
does not work.
■Turn on the camera (page2).
■Transfer pictures to the computer (page39), delete pictures from the
camera (page19), switch image storage locations (page 35), or insert
a card with available memory (page3).
Slide show does
not run on external
video device.
■Adjust the camera Video Out setting (NTSC or PAL, see page37).
■See the external device’s user’s guide.
Picture is too light. ■Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■Decrease Exposure Compensation (page16).
Picture is not clear. ■Clean the lens (page 58).
■Make sure your camera is not in Close-up mode.
■Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■Press the shutter button halfway to focus and set exposure. When the
framing marks turn green, press the Shutter button completely down.
■Place the camera on a flat, steady surface or use a tripod.
Picture is too dark. ■Turn on the flash (page 9).
■Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.
■Use Fill flash (page9) or change your position so light is not behind
the subject.
■Increase Exposure Compensation (page16).
If Try one or more of the following