Kodak ZD710 52 , NOTE: The flash does not fire in all modes.

52 www.kodak.com/go/support
Troubleshooting
Picture orientation is
not accurate
■Set the Orientation Sensor to ON (see page34)
Flash does not fire ■Open the flash unit.
■Check the flash setting and change as needed (see page9).
NOTE: The flash does not fire in all modes.
Storage location is
almost or entirely full
■Transfer pictures to the computer (see page47).
■Delete pictures from the card (see page16) or insert a new card.
■Change image storage location to internal memory (see
page 33).
Battery life is short ■Make sure the correct battery type is installed (see page62).
■Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■Insert a new or charged battery (see page 2).
You cannot take a
picture
■Turn camera off, then on again. Make sure the camera is not in
Favorites mode. If prompted, set language and date/time.
■Press Shutter button all the way (see page 5).
■Insert a new or charged battery (see page 2).
■Wait until the AF/AE indicator turns green before attempting to
take another picture.
■Memory full. Transfer pictures to the computer (see page47),
delete pictures (see page 16), change image storage location
(see page 33), or insert another card.
Error message appears
on EVF/LCD
■Follow the EVF/LCD prompts.
■Turn the camera off, then on again.
■Remove memory card from the camera.
■Remove the battery and wipe the contacts with a clean, dry cloth.
■Insert a new or charged battery (see page 2).
■Get customer support help (see page 56).
If Try one or more of the following