Kohler K-2273 manual Install the Lavatory, K-2271

		1/8" (3mm) Thick
1/8" (3mm) Thick	3/8" (1cm)	Bead of Sealant
Bead of Sealant
	(TYP.)
1/4"	3" (7.6cm)
(6mm)	Rim of
1-3/8"	Lavatory
(3.5cm)
Cut-out	Cut-out	3" (7.6cm)
Hole
	Hole
K-2271		K-2273

2. Install the Lavatory

Cut out the opening by carefully following the pencil line traced from the template.

CAUTION: Risk of personal injury or product damage. Handle with care. Vitreous china can break or chip if the product is handled carelessly.

Temporarily set the lavatory into the countertop cutout to check for ®t.

Remove the lavatory from the countertop cutout.

Install the wall-mount faucet according to the manufacturer's instructions.

K-2271

NOTE: Do not substitute another sealant for the one provided. The supplied sealant is required to permanently bond the lavatory to the countertop.

Apply two 1/8² (3mm) beads of sealant around the countertop cut-out hole. Apply the ®rst bead of sealant approximately 1/4² (6mm) away from the cut-out hole edge. Apply the second bead about 1-3/8²(3.5cm) from the ®rst bead. (see illustration)

Set the lavatory into the countertop cutout. Use care to avoid smearing the sealant beads.

1018899-2-A 4 Kohler Co.