3￿DR￿WER UNITS￿

Determine whether you have a horizontal or vertical drawer unit. Check orientation of large drawer to verify.

NOTE:￿When installing a horizontal unit the large drawer must be installed on the left*hand side.

Determine the desired location of the drawer unit.

Cleat2"1/2"

Horizontal Drawer Unit

3"1/8"

￿easure down 3*1/8" from

where the top edge of the drawer unit will be located and 2*1/2" in from where the right edge will be located. ￿ake a mark at this point.

While holding the cleat with the largest side facing away from the wall, align the right hole in the cleat with the mark on the wall.

￿ake sure cleat is level and predrill holes into the wall to align with the holes in the cleat. Use a drill of adequate diameter to accommodate fasteners (not provided).

Secure cleat to wall with fasteners (not provided).

Cleat

2"1/2"

3"1/8"

Vertical Drawer Unit

Kohler Co., Kohler, WI

3

86217"2"

AA

(C)

 

 

Page 3
Image 3
Kohler K-3106-F2 manual 3DRWER Units