Kolcraft S77-T-R3 Car Seat Restraint Storage, To Install Car Seat, Belts may cause strangulation

Car Seat Restraint Storage
1	Restraint belts for the Infant Car Seat are
	red and are located in the small pockets
	on each side of the stroller seat.
1	CAUTION: When not using your red
	infant car seat restraint belts, store them
	inside pocket. Failure to store restraint
Restraint belts	belts may cause strangulation.

To Install Car Seat

Below is a list of car seats that will fit on the Jeep® Liberty 3-Wheel Stroller. If your Infant Car Seat is not one of the models listed below, DO NOT use yourinfant car seatwith this stroller. Other Infant Car Seat models will not fit properly and may result in serious injury to your child.

•Britax® Companion®	•Graco® Safe Seat™
•Chicco® Key Fit & Key Fit 30	•Peg Pérego® Primo Viaggio SIP
•Graco® Snug Ride™ Series
	￿ 1	back.Recline stroller seat first and push canopy
	2	Place car seat in seating area of stroller
2		so that child is facing handle of stroller.
		Make sure the car seat is resting against
		front tray and that the car seat is level.
		Your child’s head should be slightly
		above their knees. Do not let infant car
		seat sit on top of tray.
	X	NOTE: Your Infant Car Se		at may have a
		level in dic ator. I t is not necessary			fo r
		use wi th this s troller and the ind icator
		may fall outside the recom		mend ed
		area. The level i	ndicator	is for use w hile
		the Infant Car Seat is in an automo			bile.
	3	Thread RED infant car seat restraint belts
		located in the side pockets through the
3		clips on the top of the car seat.
		NOTE: Some car seats do not have clips.
		Secure belt over	lowest point of car
		seat.

12

Continued on next page