To Assemble Front Wheel Tube
| 1 | Place stroller so the handle bar and rear |
|
| wheels are touching the floor. |
2 | 2 | Position front wheel assembly over |
| plastic side housings. |
3
4
Side Housing
3 |
| Align tubes with plastic housings and |
|
| push front wheel assembly on the frame. |
| ||
|
| You may need to depress the spring |
|
| loaded buttons slightly while assembling |
|
| the tubes. |
|
| NOTE: If your spring loaded button |
|
| becomes out of place, take pliers and |
|
| feed button into hole. |
|
|
|
|
| NOTE: Make sure that spring loaded |
|
| buttons pop through. |
|
| CAUTION: If spring loaded buttons DO |
|
| NOT pop through, front wheel assembly |
|
| could fall off during use. |
|
|
|
|
| Secure Front Wheel Tube to the front |
4 |
| |
|
| frame tubes using screws. The screws |
|
|
should be aligned into the 2 holes located on the underside of plastic side housing. Secure with a Phillips screwdriver on both sides.
6
