Kole Audio electronic warranty Design Features, Thiele / Small Parameters, KMX-10, KMX-12

Kole Audio KMX Woofers

Congratulations on your purchase of one of the finest woofers available for your vehicle today.

The KMX is designed for the serious SPL enthusiast. Our engineers developed a new finished aluminum dust cap to aid in thermal transfer and also help to lower the resonant frequency. The aluminum dust cap is direct- coupled to the voice coil former, and serves to draw 50% of the heat away from the voice coil to the dust cap, thus acting as a voice coil heatsink. This “heatsink” action serves to maintain the strength of the bond between the cone and the voice coil by preventing adhesive breakdown due to thermal buildup. This revolutionary dust cap allows the woofer to handle 56% more power without sacrificing sensitivity. Your competition will never know what hit them.

Please take a few moments to fill out the warranty card and review this manual before installing this woofer for proper connections and box sizes.

Design Features

Two Piece, Die-cast Aluminum Basket
Non-Pressed Paper Cone with Aluminum Dust Cap
Large Roll Treated Foam Surround
Woven “Through-the-Spider” Tinsel Leads
Dual CONEX Spiders
Dual 2-ohm Voice Coils
1-piece rubber gasket
Black/Yellow Wrinkle Coat with Diamond Cut Finish
Heavy Duty Connectors
SPL:	10” – 89 dB	12” – 90 dB	15” – 92 dB
Magnet size:	10”- 170 oz.	12” –270oz.	15” – 270 oz.
BASV/Kapton hybrid 18 awg voice coil:
	10” - 3”	12” - 3”	15” - 4”
RMS Power (watts):	10” – 700	12” – 800	15” - 1000
MAX Power (watts):	10” – 1400	12” – 1600	15” – 2000

Thiele / Small Parameters

	KMX-10	KMX-12	KMX-15
Fs	35.2 Hz	27.39 Hz	29.6 Hz
Vas	0.48 Cu. Ft.	1.45 Cu. Ft.	1.79 Cu. Ft.
Qms	5.27	5.13	4.685
Qes	0.479	0.418	0.484
Qts	0.439	0.3867	0.439
Xmax	0.473”	0.473”	0.748”