KH1190_Elek_Gebaeckpress_UK 14.06.2006 11:08 Uhr Seite 7
KH1190
Note: Fill the container to the MAX marking at the most.
Process the filled pastry straight away.
4. Place the container on the motor unit as described in the chapter „Assembling the container“.
5.Place the power plug in a wall socket. The Cookie Gun is now ready for use.
Shaping biscuits
Note:
• Use exclusively the motif discs for the shaping of biscuits.
•Line the baking tray with baking paper. Do not use Teflon, fats or oil paper, as the biscuits then do not keep their shape.
• Ensure that the closing ring is firmly on the container , and the container correctly placed on the motor unit
,when you switch the appliance on.
1.Place the cookie gun with the motif disc at the bottom on the baking paper.
2.Hold the cookie gun in the hand so that you can comfortably reach
the start switch with your thumb.
3. Press on the start switch | until the |
first biscuit has been formed. | |
4. Release the start switch | and place |
the cookie gun in another position. | |
How long you must press the start | |
switch is dependant on the desired | |
size and shape of the biscuit. If you | |
press the start switch | only shortly, |
you will form a small biscuit. The longer | |
you press the start switch | , the larger |
the biscuit will be. |
|
5.Repeat the steps until you have shaped a sufficient number of biscuits.
Notice:
•Should the pastry be too sticky, place it in the refrigerator for 15 minutes.
Adding decorations
Notice:
• Use the nozzles exclusively for sha- ping
•The decoration substance must have a soft and creamy consistency, other-
| wise it will block the nozzle . |
• | Press the start switch first of all only |
| shortly, to see how the substance res- |
| ponds. It can happen that the substance |
| may continue to flow out for a short |
| time. |
1. | Hold the cookie gun at a slight angle. |
2. | Press the start switch . |
3. | As soon as the decorative substance |
| starts to flow from the nozzle , move |
the cookie gun in accord with the de- corative design you wish to create.
Note: Should the pusher block during use, it could be that the substance or the pastry is too firm. Remove all of the substance resp. the pastry and, if possible, blend some fluids into it.
- 7 - |
