Elmo HV-7100SX instruction manual 9 RS-232C SPECIFICATIONS, Cable Connection, Setting Up

9 RS-232C SPECIFICATIONS

This product can be controlled by a PC connected to this product through the RS-232C terminal [RS-232C].

1

Setting Up

(1)Connect this product to a PC with an RS-232C connection cable.

When using an RS-232C cable available in the market, make sure of the connection shown the next page.

To protect this product and the PC, be sure to turn off all the power switches of all equipment before connecting.

(2)Start the PC, and set the communication mode of the RS-232C to the communication mode of this product.

For the information how to set the communication mode of the RS-232C, refer to the instruction manual of the PC.

(3)Start the PC program to operate this product.

(4)Control through the RS-232C will start.

For communication control, be sure to take the above steps for setting.

2

3

4

5

6

7

Cable Connection

		Visual Presenter side
				(DSUB-9P)
DSUB-9P (Female)					CD	1
5	4	3	2	1	RXD	2
					TXD	3
					DTR	4
					SG	5
					DSR	6
9		8	7	6	RTS	7
					CTS	8
					RI (CI)	9

PC side (DSUB-9P)

1	CD	PC side :
		DSUB-9P (Female)
2	RXD
		5	4	3	2	1
3	TXD

4DTR

5SG

6DSR

7RTS

8	CTS	9 8 7 6
9	RI

8

9

10

11

46