Elmo HV-7100SX instruction manual White Balance, Auto, One-Push

White Balance

Front operation panel

MONITOR OUTPUT		PAUSE	OPEN IRIS CLOSE		WHITE
	RGB1			AUTO/MANUAL	BALANCE	TELE
MAIN						ZOOM	AF
	RGB2	F.A.M.	IMAGE ROTATION POSI / NEGA	LAMP	CONTRAST
						WIDE
				UPPER / BASE / OFF

1

2

The camera of this product automatically adjusts the shooting color balance (AUTO mode). However, depending on the color arrangement of document or the like, this color balance may be lost.

In such case, shoot the stage surface, and press the [WHITE BALANCE] button on the front operation panel. Then, the indicator lamp blinks and then lights up, and the white balance is fixed. (ONE-PUSH mode)

When the [WHITE BALANCE] button is pressed again, the indicator lamp goes out, and the mode returns to the AUTO mode.

Front operation panel

WHITE

BALANCE TELE

ZOOM AF

CONTRAST WIDE

F

3

4

5

6

AUTO	To set the white balance in the auto follow mode (initial setting).
ONE-PUSH	To set the push-set white balance. By pressing the [WHITE BALANCE]
	button, the white balance for the then color temperature is fixed.

The automatically followed color temperature ranges from approx. 3000k to 8000k.

When the white balance is set to the MANUAL mode on the OSD, the white balance is fixed, and the indicator lamp remains lighting. When the white balance button [WHITE BALANCE] on the operation panel is pressed while the indicator lamp is lighting, the indicator lamp goes out, and the mode is switched to the AUTO mode.

Reference Page • OSD P.37

7

8

9

10

11

28