Elmo HV-7100SX instruction manual Installation of LCD Monitor, Connecting to the LCD Monitor

Installation of LCD Monitor

To install the LCD monitor (LM-5011N) available separately, the LCD monitor mounting metal piece (MS-201) available separately is required.

The LCD monitor (LM-5011N) and the LCD monitor bracket (MS-201) are available on option, and not attached to this Presenter (HV-7100SX).

LCD monitor

LCD

monitor bracket

1

2

3

Connecting to the LCD Monitor

The LCD monitor (LM-5011N) can be connected by using the LCD monitor out terminal of the Presenter.

When connecting to the LCD monitor out terminal, confirm the right connection direction.

When using the LCD monitor connection cable, do not use the AC adapter or video cable attached to the LCD monitor (LM-5011N).

The LCD monitor (LM-5011N) and the LCD monitor bracket (MS-201) are available on option, and not attached to this Presenter (HV-7100SX).

Do not connect any other cable to this terminal. N e g l i g e n c e w i l l r e s u l t i n t h e f a i l u r e o f t h e equipment.

LCD monitor [LM-5011N]

DC IN 12V

VIDEO IN

LCD monitor
connection cable					LCD monitor
(accessory)					out terminal [DC 12V]
				1		VIDEO OUT
9	8		7	2		GND
				3		NC
6	5	4	3
	2	1		4		NC
				5		NC
Mini DIN 9P				6		NC
(Female)
				7		+12V
				8		GND
				9		CONT.

4

5

6

7

8

9

10

"Utility Software CD-ROM"

The attached "Utility Software CD-ROM" contains the PC link software "Image Mate" and the TWAIN driver "ELMO TWAIN DS, "and can be operated as shown below.

•To transfer graphic data to PC.

•To operate the Presenter by PC.

For details, see the installation manual for "Utility Software" and "manual.pdf" in the CD- ROM.

11

36