Elmo HV-7100SX instruction manual Rear Panel, Output.Rgb Out, INPUT.RGB1, Cd-Rom

Rear Panel

1 Power Cord		2 12VDC Out		3 RS-232C		4 Stereo		5 Analog RGB-out		6 Analog RGB-in
	Receptacle		Terminal		Terminal		Audio		Terminal	Terminal 1
	[AC IN]		[DC12V]		[RS-232C]		Output		[OUTPUT.RGB OUT]	[INPUT.RGB1]
							Terminal

7 Mouse	8 USB	9 Vide-out Terminal	10 Analog RGB-in	11 Stereo	12 DIP
Terminal	Terminal	[OUTPUT.S-VIDEO	Terminal 2	Audio	Switch
[MOUSE]	[USB]	/VIDEO]	[INPUT.RGB2]	Input

		S-Video (mini DIN 4P),	Terminal
		Composite video (RCA pinjack)	1/2
	Name	Function	Reference Page
1	Power Cord Receptacle [AC IN]	Connected to the power cord connector.
2	12VDC Out Terminal	To output DC12V and the image. This	P.36
	[DC12V]	connecting terminal specially designed
		for the LCD monitor (LM-5011N)
		available separately.
		Do not connect the equipment other
		than LM-5011N.
3	RS-232C Terminal	To connect the RS-232C cable when	P.46
	[RS-232C]	controlling the main unit from the PC.
4	Stereo Audio Output	To output sound to audio input equipment.	P.22
	Terminal
5	Analog RGB-out	Image is output when this terminal is	P.16
	Terminal	connected to RGB input equipment
	[OUTPUT.RGB OUT]	(e.g., LCD projector, multi-sync monitor).
6	Analog RGB-in	Input image is output through analog	P.22
	Terminal1	RGB-out terminal and video-out terminal
	[INPUT.RGB1]	when the input selection is set at RGB1.
7	Mouse Terminal [MOUSE]	To connect the mouse (supplied accessory).	P.14
8	USB Terminal [USB]	If connected to PC with the attached USB	P.36
		cable, it is possible to transfer images
		and control the main unit by using the
		software in the attached Utility Software
		CD-ROM.
9	Video-out Terminal	To output images to the NTSC/PAL	P.15 P.16
	[OUTPUT.S-VIDEO/VIDEO]	monitor, such as TV monitor.
	S-Video (mini DIN 4P)
	Composite video
	(RCA pinjack)

1

2

3

4

5

6

7

8

9

10

11

10