Inserting credit cards:
•Open the safety flap over the cutter opening for CD/Credit cards e.
•Insert the credit card from above into the middle of the CD/Credit card cutter opening e. You can only shred one credit card at a time. ALWAYS insert them into the CD/Credit card cutter opening e with the broad side leading. If you do not, the magnetic strip will not be destroyed.
Note: Always insert the credit card into the middle of the cutter opening e. If you do not, the shredding process will not start!
Note: Should you need to be absolutely sure that the information on the magnetised strip has been irrevocably destroyed, insert the cre- dit card into the middle of the cutter opening for paper r.
Take note that the waste will then fall into the large collection container t. If need be, emp- ty if first, so as to ensure an easier separation of paper and plastic waste..
Inserting a CD:
Warning!: NEVER place a finger into the cen- tral hole of a CD when you are feeding it into
the appliance.
•Insert the CD from above into the middle of the CD/Credit card cutter opening e. You can only shred one CD at a time.
Clearing a material blockage:
• Press and hold the switch w in position should the item to be shredded become jammed.
The appliance now goes into reverse and the material to be shredded is returned.
•Place the switch w into position 
(OFF) as soon as the jammed item is returned.
Switching the appliance off:
•To switch the appliance off, move the switch w
into the middle position 
(OFF).
Emptying the waste container
•Empty the waste container t/u regularly.
•Dispose of the waste material in an environmen- tally responsible manner.
Emptying the large waste container (Paper)
Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance.
•Remove the cutter attachment q from the large waste container t.
•Remove the small waste container u at the front of the large waste container t, so that it does not fall out.
•Empty the large waste container t and then put everything back together again.
Emptying the small waste container (Plastic)
•Remove the small waste container u from the front of the large waste container t to empty it.
•Replace it after emptying it.
Notice regarding overheating of the appliance:
If it overheats, the appliance switches itself off automatically.
Important: Remove the power plug from the wall socket to avoid an unintended starting of the appliance.
•To switch the appliance off, move the switch w
into the middle position 
(OFF).
•Empty the waste containers t/u.
•Allow the appliance to cool down.
•Reinsert the power plug into the socket.
•Switch the appliance on, in that the switch w
is placed in the position 
.
- 4 -
