Kompernass KH4407 Technical data, Items supplied, Appliance description, Commissioning, Operation

Models: KH4407

1 8
Download 8 pages 45.9 Kb
Page 5
Image 5
Tips for safety:

Tips for safety:

Place the appliance in the immediate vicinity of an electrical power socket. Do not use an exten- sion cable. Ensure that the appliance and the po- wer socket are easily and quickly accessible in the event of an emergency.

Never overburden the appliance. The paper shredder is designed for brief operating periods.

In cases of danger, immediately remove the elec- trical plug from the socket.

NEVER use the shredder for tasks for which it was not designed.

Always be attentive! Always pay attention to what you are doing and act with common sense. Never use the appliance when you are distracted or don’t feel well.

Technical data

Mains voltage:

220-240 V ~ 50Hz

Nominal current:

1,8 A

Rated output:

380 W

Protection class:

II

Cutting process

 

for Paper:

Crosscut, 4x18 mm particles

Working width:

223 mm

CO Time:

3 minutes

CO Time

The C.O. Time (Continuous Operation) details how long an appliance may be used without the motor overheating and being damaged. After the appliance has run for for this period it must be switched off until the motor has cooled itself down.

Items supplied

Shredder KH 4407

Operating Instructions

Appliance description

q Cutter attachment

wSwitch

e Cutter opening for CD/Credit cards r Cutter opening for paper

t Large waste receptacle (Paper)

yPower cable

u Small waste receptacle (transparent) / Viewing window

Commissioning

First of all, place the cutter attachment q onto the large waste receptacle t so that the power cable y is located at the rear, i.e. on the closed side.

Slide the small waste receptacle u for plastics in the opening on the front side of the large wa- ste receptacle t.

Connect the paper shredder to a power socket.

Operation

Switching the appliance on:

Place the switch w to the position Technical data for shredding.

Inserting paper:

Insert paper from above and in portrait format into the cutter opening for paper r.

The motor starts automatically and switches itself off automatically if no further paper is inserted. You can shred up to 7 sheets (80g/m2 paper) at the same time.

- 3 -

Page 5
Image 5
Kompernass KH4407 manual Technical data, Items supplied, Appliance description, Commissioning, Operation, Tips for safety