Warning: Risk of injury! Due to the sharp cutting blades and the glass mixing unit proceed with great care.
Remove the measuring cap from the lid opening and place the mixing unit on the lid, so that the underside is facing upwards.
Insert the tenons of the measuring cap in the slots of the locking ring on the underside of the mixing unit. Turn the measuring cap counter- clockwise, so that the locking ring can be removed.
Remove the locking ring .
With great care remove the cutters and the sealing washer .
Danger of Injuries: Clean the cutters very carefully. They are very sharp.
After Cleaning |
|
Replace the sealing washer | , the |
cutters and the locking ring | into |
their positions. |
|
Insert the tenons on the measuring cap into the slots of the locking ring on the underside of the mixing
unit.
Turn the measuring cap clockwise, so that the locking ring once again sits firmly on the mixing unit.
The mixing unit can now be upturned and the measuring cap placed onto the lid.
KH 526
Disposal
Do not dispose of the device in normal domestic waste.
Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility. Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.
Dispose of the packaging materi- 
als in an environmentally respon- sible manner.
Warranty and Service
The warranty conditions and service cen- tre address can be found in the enclosed warranty slip.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
www.kompernass.com
Subject to technical changes.
- 9 - |
