- 3-
Intended use
This Hair Straightener / Hair Curler is intended for
the smoothing and shaping of human hair, under no
circumstances may it to be used for wigs and hairpieces
made of synthetic material. The Hair Straightener is
intended for domestic use only. Pay heed to all of the
information in this operating manual, especially the
safety instructions.
Items supplied
• Combi Hair Styler KH 5527
• Operating Instructions
Technical data
Mains voltage: 220–240 V ~50 Hz
Power consumption, max.:65 W
Protection class: II /
Appliance description
1Cool tips
2Hotplates
3LED Indicator
4Buttons "+ and "-" for temperature level selection
5On/Off button (Button lock)
6Power cable
7Locking device
Before smoothing / curling
• The hair should be clean, dry and free of styling
products. Excepted are the special products
that support a straightening of the hair.
• Comb the hair thoroughly before straightening
so that there are no knots in it.
• To achieve an especially good straightening re-
sult, spread special products for hair straighte-
ning through the hair.
• Divide the hair into manageable portions and
secure the upper portions to the head with
grips so that they do not get in the way.
Operation

Preparation

Note:
The hotplates 2must be free from contamination
of all kinds. If necessar y, clean them before
taking the appliance into use (see chapter
"Cleaning").
1. Slide the locking device 7into the position .
2. Insert the plug into a mains power socket.
3. Press the On/Off button 5. The red running
light of the LED Indicator 3glows. The hot-
plates2are being warmed up.
4. The appliance heats up automatically to the
highest heat level. The running light travels
through to the last LED.
If a lower temperature is sufficient for the hair,
press the button “-” 4repeatedly until the running
light reaches the desired heating level.
The running light progresses up to...
• ....the 6th red LED, highest heat level, for very
robust and difficult to shape hair.
• ...the 5th red LED, high heat level, for very robust
hair.
IB_KH5527_E40718_LB6 13.10.2008 8:43 Uhr Seite 3