- 5-
Attention!
Ensure that the hotplates 2do not make contact
with your hand. Risk of Burns!
Only the tips 1are cool.
5. Open the hotplates 2a little and now withdraw
the combi hair styler from your hair.
6. Repeat the process with each individual strand.
7. When you have worked all of the strands, double
press the On/Off 5button to release the tem-
perature lock. The green LED goes out.
8. Press the On/Off 5button until the LED Indica-
tor 3goes out.
9. Remove the plug from the wall power socket.
10. Press the hotplates 2together and slide the
locking device 7to the position .
11. Wait until the hair has cooled down before
continuing with the styling.
Cleaning
Attention!
Remove the power plug from the wall socket. Risk of
electric shock!
Always allow the appliance to cool down complete-
ly before cleaning it. Risk of Burns!
• Wipe the housing and the hotplates 2with a
soft and slightly moistened cloth.
• In cases of stubborn soiling, apply some mild
detergent to the moistened cloth.
Note:
Do not use aggressive or abrasive cleaning agents.
These could attack the upper surfaces and irreparably
damage the appliance.
Note:
Do not use the appliance again until it has completely
dried out.
Storage
Attention!
NEVER wrap the power cable 6with plug around
the appliance. This would cause irreparable damageto
the appliance.
Attention!
To avoid an unintentional switch on of the appliance,
ALWAYS remove the plug from the mains power
socket if the appliance is not in use.
• ALWAYS lay the appliance on a heat-resistent
surface to cool down.
• Press the hotplates 2together and slide the
locking device 7to the position .
• Store the combi hair styler at a clean and dry
location.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the provisions of European
Directive 2002/96/EC.
Dispose of the appliance through an approved
disposal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
IB_KH5527_E40718_LB6 13.10.2008 8:43 Uhr Seite 5