Place massage accessories for the middle console
➩Select a massage accessory for the point massage.
Roller massager: stimulating rolling massage of the feet for relaxation of the feet.
Accupressure massager: for Shiatsu Massage (Asian finger pressure
➩Simply set the respective massage accessory in
the recess of the middle console between both footbeds.
Filling with water
Danger of an electric shock!
•Only fill the water container to the marking „MAX“ (ca. 3l). Otherwise, water could over- flow during the foot spa.
•First connect the appliance to the power source when you have filled it with water.
➩Fill the water bath with warm or cold water.
Note: The purpose of the heating function is not to heat cold water.
It should simply maintain the temperature of the water.
➩You can also use special bath additives. Howe- ver, do not use any
Switching on
Warning!
•Do not switch the foot spa on when your feet are in the appliance.
➩Insert the power plug in the socket.
➩Sit comfortably on a chair. But do not put your feet into the water yet!
➩ Adjust the switch to the desired combination. You can set the described functions in the following combinations:
| 2 |
3 | 1 |
| 0 |
- Function switch |
|
position 0: | Appliance switched off |
- Function switch |
|
position 1: | Massage + Heat |
Note: You can also use these settings as a dry massage, without water in the water container.
-Function switch
position 2:Massage + Heat + Bubble
-Function switch
position 3: | Heat + Bubble |
Using the foot spa
➩Now place your feet in the water container.
➩During the water bath you can alternately mas- sage the soles of your feet on the massage at- tachments.
Caution: Do not exceed the maximum operating period
After the foot bath
➩Turn the appliance off at the function switch and remove the plug from the electrical socket.
➩Carefully empty the water out through the water
drainage feature .
➩Apply skin care oil to your feet.
➩Then rest for a while.
- 4 -
