- 5 -
Press the button PROG atwice, so that TIMER
appears in the display t. Programme in the
desired start time with the button HOUR oand
the button MIN i(see chapter "Setting the Time").
When the desired start time has been entered in,
press the button PROG aonce more. The start
time is now programmed. The display tshows
the normal time.
To activate the timer, press twice on the button
ON/AUTO/OFF s. The green indicator lamp
AUTO SET uglows. The coffee maker will now
start the brewing process at the programmed
time.
If you want to deactivate the timer, press the button
ON/AUTO/OFF s. The green indicator lamp
AUTO SET uextinguishes.
Cleaning
Before cleaning, ALWAYS remove the plug from the
wall power socket.

Risk of electric shock!

Before you clean the Coffee Maker you MUST
remove the plug from the power socket.

Attention!

NEVER submerge the Coffee Maker in water.
This would irreparably damage the appliance.

Risk of burns!

Always wait until the coffee maker has cooled
down before cleaning it.
Wipe the housing with a damp cloth. For stubborn
soiling use a mild detergent on the cloth.
Clean the glass jug l, filter qand filter basket
1( in mild sudsy water and rinse them with lots
of clean and clear water.
NNoottee::
Clean the Filter qimmediately after use. If left until
later, it will be more difficult to clean.
If coffee powder or something similar has deposited
itself in the coffee sieve of the glass jug l, proceed
as follows:
Upturn the glass jug l.
Press the two outer locks h/kinwards and
hold them firmly.
You can now slide the coffee passage lock j
inwards. The coffee passage gopens itself.
Hold it open.
You can release the outer locks h/k.
Allow water to flow through the opened coffee
passage g. The residues in the sieve should be
washed out with the water. Should they still not
dissolve/detach themselves, gently scrub the sieve
with a soft brush.
When the sieve is free of residues, release the
coffee passage lock j. The coffee passage g
is now closed.
IB_KH1098_E2690_LB3 06.03.2008 11:05 Uhr Seite 5