KH1148_Heiz_IB_UK 10.08.2006 11:52 Uhr Seite 6
KH 1148
Delivery content
Fan Heater
Operating instructions Warranty card
•Place the Fan Heater on a level surface.
•Insert the plug into a wall socket.
The Fan Heater is now ready for service.
Device Overview
Carrying handle
Switch for the oscillating function Function switch
Control lamp Protective grating Safety switch Base
Thermostat regulator
Technical data
Mains voltage: | |
Output: |
|
Heating level 1: | 1000 W |
Heating level 2: | 2000 W |
Protection class: | II |
Safety
Tilt
This Fan Heater is fitted with a safety switch . Should the Fan Heater tip over, it switches itself off automatically. The Fan Heater first switches itself on again when it is in an upright position.
Overheating protection
The Fan Heater is fitted with overhea- ting protection. In the event of over- heating, it switches itself off. Should this happen, check to see if the protecti- ve grating is covered or blocked. Switch the Fan Heater to the position „0“. Wait until it has cooled down before swit- ching it back on.
Before the first use
•Take the Fan Heater from the transport packaging.
•Remove all packaging material.
Plastic bags can be dangerous.
To avoid the chance of suffocations, ensure that they do not come into the possession of children.
•Check the items to see that they are all present, complete and without any damage.
Operation
To use the ventilator function:
• Place the function switch into the position Fan 
.
•Place the thermostat regulator on HI.
To use the heating function:
• Place the function switch to the desired heating level, 1 or 2.
- 6 - |
