Kompernass KH 1171 manual Error Messages, Cleaning and Care

•	Briefly press the Start/Stop button		to interrupt
	the programme at the very start of the baking
	phase or, remove the power plug from the wall
	socket. Ensure that you re-insert the power plug
	within 10 minutes so that the baking process can
	be continued.
•	Open the appliance lid	and remove the
	baking mould . You can take the dough out
	with floured hands and remove the kneading
	paddles .
•	Lay the dough back into the baking mould .
	Replace the baking mould	and close the
	appliance lid .

•Insert the power plug into the wall socket. The baking programme continues from where it was stopped.

Allow the bread to cool for 15-30 minutes before eating it.

Before cutting the bread, ensure that the kneading

paddles have been removed .

Error Messages

• If the display shows "HHH" after the programme has been started, it indicates that the temperature in the Bread Baking Machine is still too high.

Stop the programme and remove the power plug.

Open the appliance lid and allow the machine to cool down for 20 minutes before re-using it.

•If a new Programme cannot be started directly after the Bread Baking Machine has completed a baking process, it means the appliance is still too hot. In this case the display panel reverts to

the default setting (Programmme 1). Open the

appliance lid and allow the machine to cool down for 20 minutes before re-using it.

Warning

Do not attempt to take the appliance into use before it has cooled itself down. This functions only with Programmme 12.

•If the display shows "EE0", "EE1" or "LLL" after the programme has been started, first of all switch the Bread Baking Machine off and then back on by removing and then re-inserting the power plug from/into the wall socket. Should the error display continue, make contact with Customer Services.

Cleaning and Care

Warning

Before cleaning it, always remove the power plug from the wall socket and allow the appliance to cool down completely.

Protect the appliance against moisture, this could cause you to receive an electric shock.

Please also observe the safety instructions.

Important

The appliance and its ancillaries are not suitable for being cleaned in a dish washing machine!

Housing, lid, baking space

Remove all particles left behind inside the baking area using a wet cloth or a slightly wet soft sponge. Wipe the housing and the lid too, only with a moist cloth or sponge.

•Ensure that the interior is completely dry. For

easier cleaning, the appliance lid	can be
removed from the housing:

- 12 -