Kompernass KH 1605 manual Maintenance, Disposal, Importer, Reassembling the filter

Reassembling the filter

➩Insert the lower part of the filter box with the white seal g to the front.

➩Place the exhaust supports onto the filter cover such that the lugs d grasp into the depression on the filter cover. For this, slide the lock k on the exhaust supports to the right and press the exhaust supports downwards. Check to ensure that the exhaust supports r are now positioned in the appliance as illustrated under s .

➩Place the filter cover back on the filter box until the clips j of the filter cover snap back in.

Cleaning the appliance

➩Clean the appliance with a dry or lightly moistened cloth only. Do not use abrasives or detergents, these could damage the plastic surfaces.

➩Do not remove stubborn glue remnants from the sealing wire t with hard or sharp objects, at the very most carefully use a fingernail.

Otherwise the sealing wire and the isolation below it could be damaged.

Maintenance

Warning:

NEVER open the housing! There is potentially fatal high voltage in the appliance. Arrange for the appliance to be repaired by specialists only.

The appliance is maintenance-free. No form of maintenance, either on or in the appliance, is intended for execution by the user. In the event of malfunction or apparent damage, make contact with Customer Ser- vices.

Disposal

Do not dispose of the appliance in your normal domestic waste.

This appliance is subject to the European Guidelines 2002/96/EG.

Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations.

In case of doubt, please contact your waste disposal centre.

Dispose of all packaging materials in an environmentally friendly manner.

Importer

KOMPERNASS GMBH

BURGSTRASSE 21

D-44867 BOCHUM

www.kompernass.com

- 6 -