IB_KH1803_E2452_LB3 22.02.2008 12:37 Uhr
Seite 4
Cleaning |
| Disposal |
Danger of electrical shock
ALWAYS remove the plug from the power socket before cleaning the hair dryer.
Cleaning the housing
➪To clean the housing, use a soft cloth moistened with a mild soapy solution.
Cleaning the air suction grill
Risk of Fire!
Clean the air suction grill w at regular intervals with a soft brush.
➪Press the air suction grill w together, from above and below, so that you can release it from the hair dryer.
➪Clean the openings of the air suction grill w with a soft brush.
➪Insert the upper securing lug of the air suction grill w into the guide on the hair dryer. Then press the lower securing lug into the hair dryer until the air suction grill w audibly engages.
Danger of an electrical shock!
After being cleaned, the hair dryer must be com- pletely dry before using it again.
Troubleshooting
Should your hair dryer not function as expected, first remove the plug from the wall socket and allow the appliance to cool down for a few minutes.
The appliance is fitted with an overheating protector! Should the appliance still not function, consult the service department detailed on the Warranty card.
Do not dispose of the appliance in your 
normal domestic waste.
Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal centre.
Dispose of the packaging materials in an environmentally responsible manner.
Technical data
Mains voltage:
Nominal power: 2200 W
Protection class: II /
- 4 -
