Kompernass KH 1804 Switching on/off Selecting a heat level, Using the attachments

Switching on/off /

Selecting a heat level

When you have attached the required accessory and inserted the plug into the power socket, you can switch the appliance on with the step switch e and select the output level:

„0“	The appliance is switched off
„C“	for a cold air-flow
„1“	for a reduced air-flow strength with heat
„2“	for a high air-flow strength with heat

You switch the appliance off by sliding the step switch e to the position "0" (= appliance off).

Using the attachments

Warm-air round brush

The warm-air round brush u is intended for the styling of thicker strands or waves.

1.Attach the warm-air round brush u onto the appliance as described in the chapter “Atta- ching/detaching accessories”.

2.Slide the step switch e onto the desired setting.

3.Take hair strands with a maximum width of 5 cm (ca. 2 in) and wrap them from the ends to the roots around the warm-air round brush u.

4.When the strands of hair are dry, press the release button w and guide the warm-air round brush u slowly back through the hair. As the warm-air round brush u can turn itself because of the pressing of the release button w, it is possible to draw it from the hair without the styling being stressed.

5.Comb the hair through when it has cooled down.

Brush attachment

The brush attachment o is suitable for styling pony-tails or thin strands.

1.Attach the brush attachment o onto the appliance as described in the chapter “Attaching/detaching accessories”.

2.Slide the step switch e onto the desired setting.

3.Style the pony-tail or strands as desired.

4.Comb the hair through when it has cooled down.

Volume attachment

The volume attachment i helps to bring fullness into the hair. You can use the volume attachment i either directly at the hair roots or at any position along the length of the hair.

1.Take ca. 5 cm (ca. 2 in) wide strands and slide them between the fingers of the volume attach- ment i.

2.Turn the volume attachment i to obtain the des- ired shape and fullness.

3.Allow the warm air to take effect for a few seconds.

4.Pull the volume attachment i from the hair without pressing the unlocking device w button.

Cleaning and care

Never open the housing of the appliance. There are no operating elements inside. An open housing will create the risk of a potentially life-threatening electrical shock .

Before cleaning the device, ....

•always disconnect the power plug from the power socket

•and let it cool down completely.

- 16 -