Sleep function
You can activate the sleep function via the SNOOZE button. You can set a time of up to 90 minutes in
•Press the SNOOZE button. The symbol for the sleep function and 90 (for 90 minutes) will appear.
•Press the SNOOZE button repeatedly until 90 is displayed to count down the sleep time in 10 minute steps.
•Either select a sleep time (the sleep symbol remains on the screen) or press SNOOZE again until 00 appears on the screen.
The sleep time is now switched off.
Setting the station
•Select the required frequency band (FM, MW, LW or SW), using the frequency select button.
The corresponding abbreviation will appear on the screen.
•The UP and DOWN buttons can now be used to set the desired frequency.
•If you keep UP or DOWN pressed for about three seconds, the automatic station search will start.
•The search stops as soon as a station with sufficient signal strength is found.
Setting the MW band
Since the radio transmitter systems differ from one country to another, you should make the appropriate setting via the reception range setting:
•With the radio switched off, press the button MODE six times and then select, using the buttons UP resp. DOWN, the appropriate reception range as per the following table:
- 25 -