General functions
Key lock
In order to prevent changing the settings unintentionally by touching the buttons, you can activate the key lock.
•Press and hold down the MEM button for around 3 seconds.
On screen, the message 
flashes. All buttons, except the buttons SNOOZE and MEM, are now blocked.
•Press and hold down the MEM button again for about 3 seconds to
cancel the key lock. The 
message on the screen disappears.
Screen lighting
•Press any button to illuminate the screen. The screen will remain lit for about 10 seconds.
Stand
•Fold out the base on the rear of the device to make the device more stable.
Time functions
When the power supply is effective (mains or battery operation), the device launches with an automatic update.
"SYSTEM SETTING PLEASE WAIT" appears in the display.
When an RDS signal is received, the time and date are adjusted automa- tically. Subsequently, the current time is shown in the display.
If the time is not adjusted automatically, make the settings manually, as explained in the following sections.
- 12 -
