KH2210_IB_UK 11.09.2006 14:58 Uhr Seite 4
bifinett KH 2210
•Do not leave a heat generating appliance unsupervised!
•Do not allow children and elderly persons handle the appliance unsupervised as they may not always be able to rightly estimate the possible risks.
You can thus prevent the appliance from being damaged
• Use the kettle only in the base station provided for the same . Do not use the base station for any other purposes.
•Do not expose the base station to any liquids and protect it from
splashes.
• Do not separate the kettle from the base station while the appliance is in operation. Always switch off the appliance first.
•An improper use or handling of the appliance may lead the appliance to malfunction and cause injuries to the user.
•No liabilities shall be accepted for damages caused by improper or wrong use.
Before the First Use
1. Remove all the packaging material!
2. Clean the kettle , by pouring water into it and bringing it to a boil (See "Boiling water“). Pour out the water and repeat the process.
Operation
1.Pull the power cord out only as much as is necessary. Pull it out by opening
the base station and connect the plugs with an appropriate power socket.
2.Open the lid and fill in with the desired quantity of water. Please note
the level indicator | of the appliance. |
Fill the kettle ... |
|
-atleast up to the MIN mark, so as not to overheat the electric water kettle.
– no higher than the MAX mark so that no boiling water spills out.
3.Close the lid and place the appliance
on the base station . The appliance can only be switched on if it is fixed to the base station.
4. Keep the On/Off switch on
„ 
“- position. The appliance begins to operate, the indicator lamp
begins to flash.
5.If the water is boiling the appliance switches off automatically. The On/Off
switch automatically moves to the "O“ position, the indicator lamp turns off.
6.If you want to stop or interrupt the boiling process, keep the On/Off
switch on the "O“ position. However, you can continue the boiling process by waiting for 20 seconds until the heating element has cooled off. You can then switch on the appliance once again.
- 4 -
