Interaction with batteries
Leaking batteries can cause damage to the radio alarm.
•If you do not intend to use the appli- ance for an extended period, remove the batteries.
•Should the batteries leak, clean the battery compartment with a dry cloth whilst wearing protective gloves.
Note:
Rechargable batteries cannot be charged via the battery connection. In the event of an extended power cut (several hours), the clock and alarm times must be checked and possibly
Assembly
Before operating the device, make sure that it is in a faultfree condition. Do not use it if it is not.
•Then insert the plug into the wall power socket. Select a wall power socket that is at all times easily accessible so that the plug can be easily withdrawn in the event of a malfunction.
Setting the clock
If you are setting up the appliance for the first time after inserting a new battery:
•Whilst holding the button TIME r pressed down:
•Press several times in succession, or simply press and hold the button HOUR q, to adjust the hour setting.
•Release the button HOUR q, as soon as the desired hour setting appears in the display i.
•Press several times in succession, or simply press and hold the button MIN w, to adjust the minute setting.
•Release the button MIN w as soon as the desired minute setting appears in the display i.
The adjusted time will be automatically accepted as soon as the button TIME r is released.
Radio Reception
•Push the slider switch o into the position ON.
•Turn the volume controller VOLUME d to a medium position.
- 6 -
