Kompernass KH 2265 manual Preparing the mini hi-fisystem for use, Unpacking the components, †Danger

7.Select a suitable location for the mini hi-fi system

Place the mini hi-fi system and loudspeakers on a level, flat, scratchproof, non-slip surface. Make sure that the surface is made to support the weight of the mini hi-fi system/speakers.

†Danger!

Do not place the mini hi-fi system …

Úin areas exposed to direct sunlight. Otherwise, the mini hi-fi system could overheat and be damaged irreparably. This could also cause a fire!

Úin the immediate vicinity of heat sources such as ovens, heaters and similar devices or vent openings of other electrical devices. Otherwise, the mini hi-fi system could be damaged irreparably. This could cause a fire!

Úin dusty environments. Otherwise dust could collect in the mini hi-fi system. If a large quantity of dust collects in the mini hi-fi system, it could overheat and be dam- aged irreparably. This could cause a fire!

Úin damp environments. Otherwise moisture could seep into the mini hi-fi system. This could cause danger of electrical shock and fire!

Úin the immediate vicinity of water, such as bath tubs or swimming pools. Do not place any receptacles contain- ing water (e.g. flower vases) on the mini hi-fi system. If water enters the mini hi-fi system or it falls into water, it could cause danger of electrical shock!

Do not place open flames (e.g. burning candles) on the mini hi-fi system. This could cause a fire!

Do not cover the vent openings of the mini hi-fi system! Do not place the mini hi-fi system on beds, blankets, etc. Otherwise, the mini hi-fi system could overheat and be damaged irrepa- rably! This could cause a fire! Make sure that the vent open- ings are at least 10 cm from the nearest wall or large object.

™Careful!

Do not place the mini hi-fi system in areas exposed to physi- cal shock or constant vibrations. Physical shock and constant vibrations could lead to malfunctions and long-term damage.

8.Preparing the mini hi-fi system for use

8.1. Unpacking the components

Carefully remove all components from the packaging. Al- ways hold components with both hands. Do not drop the components! This could cause irreparable damage.

8.2.Preparing the remote control unit for use

1Open the battery compartment of the remote control unit.

2Place two AAA/LR03/Micro batteries in the battery compartment. These are not included in the delivery. In- sert the batteries in the right direction (polarity +/-) as shown on the battery compartment.

3Close the battery compartment of the remote control unit.

Warning!

Battery acid could leak out, especially if the batteries are old. Therefore you should remove all batteries if you do not plan to use the remote control unit for long periods of time. This protects the remote control unit from battery acid leakage.

8.3. Connect the subwoofer to the main unit

Insert the subwoofer connector cable into the appropriate in- put on the back of the subwoofer.

8.4.Connect the loudspeakers to the main unit

1Uncoil the loudspeaker connector cable to its full length.

2The loudspeaker connector cables have to be connected to the loudspeaker outputs on the back of the main unit.

Insert …

Úthe right loudspeaker connector cable in the red loud- speaker output ”R”.

Úthe left loudspeaker connector cable in the white loud- speaker output ”L”.

English • 9

IB KH2265 EN IE.indb 9 09.10.2004 18:44:21 Uhr