4. Connecting the appliance
Before oeprating the appliance, make sure that it is in perfect condition. Do not use it otherwise.
➪Open the battery compartment at the back or underneath, and insert a 9V battery pack.
➪Insert the power plug into the power socket.
Choose a power socket that is accessible at any time, so that you can pull out the plug from the socket quickly if there is a fault.
5. Setting the clock
If you are setting up the appliance for the first time after inserting a new battery:
Press and hold the TIME button and:
Press the HOUR button to set the hour.
Press the MINUTE button to set the minutes.
6. Setting the alarm time
If the clock is set correctly, as descri- bed above:
Press and hold the ALARM button and:
Press the HOUR button to set the hour.
Press the MINUTE button to set the minutes.
7. Radio reception
Move the sliding switch to the ON position.
Turn the volume control VOL to the centre position.
Select the frequency band with the AM / FM sliding switch.
Select the desired station with the TUNING control.
8. Switching on the alarm
If the clock and alarm time are set correctly, as described above:
Set the sliding switch to the AUTO position. The alarm is now swit- ched on. This is confirmed by a dot at the bottom left of the display.
You will be awakened by the radio if ...
the volume control VOL is set to a level high enough to awaken you.
You will be awakened by the alarm
signal if ...
the volume control VOL is turned quietly until it switches off with an audible click, and goes into the BUZZ setting.
9. Switching off the alarm
Press the SNOOZE button and the alarm will sound again after 9 minutes.
Move the sliding switch to the OFF positioin, to switch off the alarm altogether.
46
