Kompernass KH 2332, KH 2333, KH 2331 instruction manual Save the radio transmission

4.	Press the F-SKIP or the
GB	R-SKIP key for a few seconds and
	release the key. The automatic transmission
	now starts searching the first transmission
	with adequate signal strength.

5.Repeat the process to set other transmis- sions.

To set the transmission with weak signal strength:

6.	Press the F-SKIP or the
	R-SKIP key continuously until you get
	the desired frequency or the reception is
	optimal.
Save the radio transmission
1.	Press the TUNER/BAND key again to
	sent the transmission range (MW/UKW).

2.Search the desired transmission as descri- bed under the point "Transmission search".

3.Press the MEMORY/ PROG. 4 briefly. The indication "PROG“ appears in the display and the memory position “01“ blinks.

4. Press the ALBUM/PRESET+ or ALBUM/PRESET- key to save the current transmission in another memory position (1-10).

5.Press the MEMORY/ PROG. key again. The previously set transmissions are written in the memory.

6.Repeat the process to save other transmis- sions.

Selecting the saved radio transmissions

➜ Press the ALBUM/PRESET+ or ALBUM/PRESET- key to select a memo- ry position between 1-10.

Note: (Mains or battery operation)

Make sure that both the (UM-3/“AA“) batteries have been inserted. The saved radio transmis- sions are thus received even if there is a drop in the mains voltage.

CD/MP3-CD operation

Inserting the CD/MP3-CD

1.Press OPEN/CLOSE to open the CD slot.

2.Place the CD/MP3-CD in the CD slot.

3.Press OPEN/CLOSE to close the

CD slot. The CD/MP3 player starts and reads the contents of the CD/MP3-CD. After a few seconds, the total playback time and the number of the current track appears in the display.

Playing back the inserted CD

1. Press the PLAY/PAUSE key.

-The playback begins with the first track of the CD.

-The display shows the current track num- ber and the previous playback time.

-The CD player stops when all the tracks have been played. The total playback time as well as the number of the current track are shown in the display.

2.	Press the STOP key to stop the play-
	back.
3.	Press the PLAY/PAUSE	key to interrupt
	the playback. (The playback should be pre-
	viously activated).
4.	Press the PLAY/PAUSE	key again to conti-
	nue the playback.

Only for MP3-CDs:

➜ Press the ALBUM/PRESET+ or ALBUM/PRESET key once or multiple times to find the desired album.

Restarting the current track

➜During the playback, press the R-SKIP once. Playback of the current track restarts.

Searching a song passage during the

playback
➜ Press and hold the F-SKIP	or R-SKIP
key to search the desired song passage.
The playback continues when you release
the F-SKIP or R-SKIP	key.

Search function

Possible only for playing back MP3-CDs:

➜ Press the FIND	key to call the MP3-CD
search function.
Searching with the help of the file name
➜ Press the FIND	once to call the MP3-CD
search function.
and the alphabet "A" appears in the
display. If a file name begins with the alpha-
bet "A“ beginnt, it appears in the display as
well.
➜ Press the F-SKIP	or

R-SKIP key to search from A-Z and 0-9.

➜ Press the PLAY/PAUSE key to begin playing back the desired track.

Searching with the help of the album name

➜ Press the FIND	key twice to call the
search function.	and the "ALBUM“
appears in the display.
➜ Press the F-Skip	or R-SKIP key to

search the desired album.

➜ Press the PLAY/PAUSE key to start play- ing back the album.

Note: The device is compatible with ID3 V.1, V.2

only.GB

Track programming

Up to 64 tracks can be stored.

CD playback

1.Insert the CD in the device, as described under "Insert the CD“.

2.Press the MEMORY/PROG. key to start the programming.

3. Press the F-Skip or R-SKIP key to find a particular track.

4.Press the MEMORY/PROG. key to write the track in the memory.

5.Repeat the process until you have written all the tracks in the memory.

6.	Press the PLAY/PAUSE key to playback
	the automatically created programme.
7.	Press the STOP key to stop the play-
	back.

MP3-CD playback

1.Insert the CD in the device, as described under "Insert the CD“.

2.Press the MEMORY/PROG. key to start the programming.

3. Press the F-SKIP or R-SKIP key to find the desired album/ folder.

4.Press the MEMORY/PROG. key to write the album/ folder in the memory.

5. Press the F-SKIP or R-SKIP to find the desired track.

6.Press the MEMORY/PROG. key to write the track in the memory.

7.	Press the PLAY/PAUSE key to playback
	the automatically created programme.
8.	Press the STOP key to stop the play-
	back.

Selecting different tracks during playback

➜ Press the F-SKIP or the R-SKIP key until the desired track appears in the display.

6

Text display (ID3 display)

➜While playing back an MP3-CD, press the

FIND key for two seconds. The file name/ track/ artist/ album of the current track appears in the display.

➜ Press the FIND key once again for two seconds to go to the playback time display.

Checking the programming

1.Press the MEMORY/PROG. to take a look at the stored track. The first pro- grammed track appears in the display.

2.Press the MEMORY/PROG. key again to go to the next track.

7