English 21

Frequently asked questions

1Why doesn’t the shaver shave as well as it used to?

-The shaver may not be properly clean. Switch on the shaver and immerse the shaving unit in hot water with some liquid soap (see chapter ‘Cleaning and maintenance’).

-The shaving heads may be damaged or worn. Replace the shaving unit (see chapter ‘Replacement’).

2Why doesn’t the shaver work when I press the on/off button?

-The battery may be empty. Recharge the battery (see chapter ‘Charging’).

-The travel lock may be activated. Press the on/off button for 3 seconds to deactivate the travel lock.

-The shaving unit is soiled or damaged to such an extent that the motor cannot run. In this case, the shaving unit symbol, the tap symbol and the exclamation mark flash.When this happens, you have to clean the shaving unit or replace it. Immerse the shaving unit in hot water with some liquid soap.

-The temperature of the shaver may be too high. In this case, the shaver does not work and the exclamation mark on the display flashes. As soon as the temperature of the shaver has dropped sufficiently, you can switch on the shaver again.

3Why is the shaver not fully charged after I charged it in the Power Pod?

-You may not have placed the shaver in the Power Pod properly. Make sure you press the shaver until it locks into place.

Page 19
Image 19
Philips RQ1060 manual Frequently asked questions, Why doesn’t the shaver shave as well as it used to?